What we typed
DeWalt DWE7485 8-1/4 inch compact table saw
Feeding the tool a model number pays off. A plain table saw prompt gets category-average dimensions; the DWE7485 gets its documented carton and weight.
Tools
How much does it cost to ship a table saw?
A jobsite table saw packs to roughly 30 × 26 × 16 inches at 50–70 lb — close to the practical ceiling of parcel shipping. It can go parcel with heavy-duty packaging; cabinet saws are pure freight. Where it lands inside that band depends on lane, speed, and the finished carton, so quote the saw you actually have.
Live parcel ratesFreight review pathTracking included
The quote is the proof
Behind this page sits one live rate: 24 × 20 × 16 in, 51 lb, UPS Ground at $107.64 on the Miami-Seattle lane below.
A real quote: DeWalt DWE7485 8-1/4 inch compact table saw
On 2026-07-24 we typed “DeWalt DWE7485 8-1/4 inch compact table saw” into the SMKlog calculator and asked for Miami, FL 33101 to Seattle, WA 98101. The response arrived exactly as shown; nobody weighed the saw, measured a box, or adjusted a cent.
Packed box it returned
24 × 20 × 16 in
61 × 51 × 41 cm
Packed weight 51 lb (23 kg).
Route
Miami, FL 33101
to Seattle, WA 98101
Miami to Seattle is close to the longest domestic hop there is, and both ZIPs were priced live; that distance is most of this bill.
Even at 51 lb of real weight, the box still wins: 24 × 20 × 16 ÷ 139 comes to about 55.3 lb billable. The margin is slim, so a snugger carton could flip billing back onto the scale.
| Carrier | Service | Price | Estimated transit |
|---|---|---|---|
| UPS | Ground | $107.64 | 8-9 business days |
| FedEx | Smart Post | $108.50 | 10-11 business days |
| UPS | Ground Saver | $109.92 | 7 business days |
| UPS | 3Day Select | $157.32 | 3-4 business days |
Checkout shows one total per service, label with SMKlog's charge included, and that total is final. UPS Ground came in lowest at $107.64. Corner-to-corner lanes like this one sit at the expensive end and rates never hold still, so run today's quote on your own pair of ZIPs.
Typical packed size
About 30 × 26 × 16 in once boxed. Remove the blade, fence, and miter gauge and wrap each separately; lock or remove the extension wings; double-wall or triple-wall box with the saw unable to shift. Original box plus foam is ideal if kept.
Packed weight
50–70 lb packed for a jobsite saw. Billing picks the higher of scale weight and box math, and at this size the two run close, so an inch of extra carton can cost actual dollars.
When it routes to review
Contractor and cabinet saws at 100–400 lb are freight, full stop; they ship bolted to a pallet. Enter the real weight and the calculator will route anything past parcel limits to freight review.
Shipping a table saw: common questions
What box size do I need to ship a table saw?
Plan around 30 × 26 × 16 in packed. Remove the blade, fence, and miter gauge and wrap each separately; lock or remove the extension wings; double-wall or triple-wall box with the saw unable to shift. Original box plus foam is ideal if kept.
How much does a table saw weigh packed for shipping?
Typically 50–70 lb packed for a jobsite saw. The rate is set by the greater of true weight and the divisor result (length × width × height over the carrier's number), so weigh and tape the sealed box before you quote. Coming in light means an adjustment later.
Parcel or freight for a jobsite saw?
At 50–70 lb packed it fits parcel weight limits, but you are near the tier where freight competes, especially with a stand included. Quote both: the saw alone as a parcel in the calculator, and saw-plus-stand as a freight review if the total passes 80–90 lb.
What do I remove from a table saw before shipping?
Blade off (wrapped in cardboard, taped), fence and miter gauge off and wrapped, arbor nut and washers bagged and taped inside the throat. A blade left mounted will not stay put and will chew everything around it.
How much does it cost to ship a table saw?
Billed weight, zone, and service speed. A jobsite saw packed at 30x26x16 weighs about 60 lb, but the box's dimensional weight is about 90 lb, so parcel carriers bill 90. Long zones add real money at this weight, and express services rarely make sense for a tool this heavy. Get your route and carton priced in the calculator; USPS, UPS, and FedEx quote live, scale optional.
What is the cheapest way to ship a table saw?
Ground parcel with UPS or FedEx in the tightest box that still pads the saw well. Heavy, large boxes route better with them than with USPS, and staying inside parcel limits avoids freight complexity. Trimming box dimensions matters more than trimming weight here, because the 90 lb dimensional weight, not the 60 lb on the scale, is what you pay for. Commercial-rate online labels tend to sit 20-40% below what the counter charges.